LAST CHANCE: Save up to 85% off storewide. Ends January 12. Shop now ›
Apollo
sale
Fuchs Train II Amplifier
Fuchs Train II Amplifier
Fuchs Train II Amplifier

Fuchs Train II Amplifier

4.7 (74)

Get rich, distorted tube amp tones from a boutique legend.

  • Use your Apollo to track through the Fuchs Train II — with no latency
  • Audition 100 separate high-end recording chains, featuring multiple cabinets and classic microphones
  • Shape tones further with FX Rack’s Vintage Delay, noise gate, high/low filters, and more
  • Easily dial in old-school clean tones, dynamic overdrive, and aggressive distortion with any guitar

Runs on macOS or Windows. Requires an Apollo audio interface or UAD Accelerator. View full system requirements.

Hear It In Action

Plug-In:

Hear It In Action

Hear It In Action

Plug-In:

Hear It In Action

Plug-In:

Get Rich, Distorted Tube Amp Tones from a Boutique Legend

Inspired by the late Ken Fischer’s iconic and rare Trainwreck amplifiers, the Fuch’s Train II is renowned for its harmonically rich clean and crunch tones and aggressive rock and roll character. Developed by Brainworx, the Fuchs Train II amplifier plug-in gives you all the tone of this powerful boutique tone machine — a go-to amp for the likes of Mark Knopfler, Brad Paisley, and Cheap Trick’s Rick Nielsen.

Reviews

4.7
Rated 4.7 out of 5 stars
Based on 74 reviews
Total 5 star reviews: 62 Total 4 star reviews: 7 Total 3 star reviews: 2 Total 2 star reviews: 2 Total 1 star reviews: 1
93%would recommend this product
Write a Review (Opens in a new window)
74 reviews
  • EV
    Emile V.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    1 week ago
    Great sounding amp

    This makes my Strat sounds like it should.

    Was this helpful?
  • JD
    James D.
    Verified Reviewer
    I recommend this product
    Rated 5 out of 5 stars
    1 month ago
    EMG SA’s

    I have a hardtail offset with EMG SA’s and it sounds really nice through this Fuchs. You can really get a whole range of tones with amp by gain staging. Clean tones are had by keeping the gain low on stage 1 and 2 and turning the master level up higher. I really dig the simplicity and versatility of this amp. It really does better in service, in my opinion, for me, than the Suhr due to simplicity in design. And it sounds great with the EMGs and especially so followed by a well tweaked space echo - er, galaxy delay (whatever they call it), :).

    Was this helpful?
  • CM
    Carl M.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    7 months ago
    Great Amp

    The tones are great. The tube breakup sounds very accurate to a real amp. Great addition to my arsenal of guitar stuff.

    Was this helpful?
  • AS
    A. S.
    I recommend this product
    Rated 5 out of 5 stars
    1 year ago
    Best of to best

    This should have been the first UA amp I should have bought. This beats all other amp emulations UA has. It’s clear from clean to overdrive. Open. Not to bass-y like others.

    Was this helpful?
  • JK
    J. K.
    I recommend this product
    Rated 4 out of 5 stars
    1 year ago
    Really Digging It So Far!

    I tried the demo of this and after dialing it in and playing a few presets I decided to pull the trigger. Great tone for a plugin and it allows me to add some guitar tones I was missing without it in my library. Hint: Turn down your input on the Apollo and utilize the gain on the amp to get some nice cleans.

    Was this helpful?
Show More

Frequently Asked Questions

Yes, you’ll need an Apollo audio interface, UAD-2 Satellite, or UAD-2 PCIe card to run these plug-ins, using the onboard DSP. The plug-ins run on the hardware itself, without adding strain to your computer’s CPU. In an Apollo, onboard DSP processing allows you to run realtime UAD plug-ins with near-zero latency, and even record that processing directly to your DAW.

Yes, you can start a fully functional 14-day demo from any plug-in bundled with the UAD software. Simply click “Start Demo”, and start using it in your DAW.

UAD-2 licenses follow the hardware, it does not matter which computer they are connected to. You can have up to six UAD-2 devices registered to a system in your Universal Audio account, which share those licenses. See UAD-2 Plug-In Licensing Explained for full details. Authorization of UAD-2 hardware is managed by the UAD Meter & Control Panel Application.

Check our Knowledge Base for additional questions

You Might Also Like