Ampeg® Heritage Bass Amp Bundle
Ampeg Heritage Bass Amp Bundle
Eleven would work with all the Brainworx amps, ( except mine here ) if it had a Power Amp Selector Section, ( by tube type, #, and power supply rectifier )....i guess packaging tube power amp sections with Softube's acoustic feedback and UA's OX response, would be the best thing....
that way people can pick their preamps..
if Eleven, ( like that ) had a digital pre gain control...then i could just run a 610B...
i wired a Jensen Balancing DI transformer into my Baritone guitar's electronics...
so my "guitar cable" is actually a balanced XLR mic cable...and so, with the addition of a digital gain, the 610B would drive it just fine.....if UA wants to do Eleven that way..
I Just Noticed The OX Amp Top Box ( bye bye acoustic feedback )
So UA already has Cone Break-Up Down To A Science !!!
Great, but what if my amp is a plug in ??? and what if i want acoustic feedback also ???
maybe UA gets together with Softube on the Eleven Plugin ???
like i said, they already have the Acoustic Feedback plugin developed
Just the one review on this is fine
the rest of my reviews here are on the " Eleven, for UAD 2 "
there are several characteristic speaker cone break-up types...but the all would equate to a type of compression or limiting..
there is the alnico break-up, ( a smooth whoofy type break up )
and the aggressive green back break up ( more crunchy sounding )
and then more common types of break up that are not so well characterized...
suffice to say, a cone break-up type selector switch, in that section, would cover the bases.
i thought of a name for " the loud box "
Softube already has the acoustic feedback processor developed, and the Speaker Cone Break-up Compressor would need to be a second independent processing stage..
so it makes sense to have the one knob, that goes to eleven, in the middle; with the feedback parameters on one side, and the break-up compressor parameters on the other.
part five of my 5 star review.
maybe Brainworks and Softube could work together on an "acoustic feedback /cone break-up compressor"... it makes sense that it would be one unit...a sort of "LOUD BOX" that could be used on any guitar amp plugin..
part four of my 5 star review..
if the guys at Brainworxs get board, maybe they could develop a "UAD 2 guitar speaker break-up compressor", ( with different speaker break up characteristics), to place in the signal chain after all their great amplifiers..
part 3 of my 5 star review
the 8X10 cabs on this are working as well for me as any impulse response would...it's really an awesome amp, so thanks all..
i have no idea how cone break-up could be worked into an impulse response anyway, and maybe i can get that sort of effect with my compressor set up..
Part Two of my 5 star review
i have never heard anyone mention the fact that cabinet impulse responses don't have cone break-up...but they don't..
i like the sound of overdriven power amps, and a little cone break-up...i have softube's acoustic feedback plugin, and i like that allot....i just wish there was a way to come out of the power soak into a cabinet plugin with a dynamic break up adjuster...
in real life, i could put a 2X12 loaded with two 15 watt celestion blue back alnico 12s on this wide open 30 watt B-15N and get cone barking compression on the peaks.
my baritone guitar amp ( 6 string, 30-5/8" scale, low A )
dual 6l6 power section with a tube rectifier here, part recipe for one chunky monkey...
it's not super high gain or anything, but i run on the clean side of guitar tone and jump through rings of fire for the sustain and feedback vs gobs of gain ( which in a way accomplishes the same thing, but there is a difference to me )
Its all they say it is.
Just purchased this, like most legacy plugins, they sound good, but just like the others I have upgraded from Legacy, its instant improvement. You won’t regret getting it, small dsp compared to guitar amp dsp usage.
Tell ya what, open the legacy version that comes with your interface, record a few bars, then start the demo for this plugin .....
greedy marketing.. again
its crazy you dont provide this as part of your premium priced hardware... ill use the DAW then..
Excellent, didn't know I needed it this much.
This one should be free / Included with all systems
It's really not that special, but bareble. I've seen way better tuners from other vendors.
It could be nice to have a good tuner built into the Console App.
Don’t need real one~!!!
Plug, find tone and listen record, Here is the most stable bass sound~!!
It's a Game Changer!
Eliminating low end bass rumble from DI bass has always been a challenge that requires exact EQ to achieve a clear notation of the bass while keeping an acceptable degree of low end in the bass. This is the constant issue with DI-ing bass...the absence of the speaker & cab in the signal. This plug in cures that problem immediately. Great bass low end with clarity of note and lack of muddy rumble. This one will go on every bass track from now on. All of the amps in the plug in sound fantastic. This one goes into my short list of 'go to' plug ins.
This make bass sound exactly as it was meant to! I love it!
Finally. Seriously great bass tone in the box, direct to records. Very inspiring tones and feel. My bass go to.
Még nem próbáltam ki mindent rajta, de nagyon meggyőzőnek tűnik!
On insert et la track bass se métamorphose. Un bonheur!